Using 3/4 x 3 angle bar for the main frame and 2" for the ladder. 15" wide, maybe 3 meters long
The contents are property of the author and shall not be used without written consent
Showing posts with label ramp. Show all posts
Showing posts with label ramp. Show all posts
Friday, December 12, 2025
Process: DIY making welding your own 7,000 lbs ramp
Providing outstanding amazing values through process clarity and improvement
Sunday, December 7, 2025
DIY loading ramps costing under P10K
Providing outstanding amazing values through process clarity and improvement
Look at the simple and lightweight design
Specs:
- Length: 66"
- Width: 18"
- Weight 95 lbs/each
- 4 Inch Channel Uprights
- Steel thickness : 3/16"
- 2x2 Inch Angle Iron Runners
- 3x4 Inch Angle Iron Lip & Foot
- Fabricated in the USA
- Disclaimer: Length & Width may vary ±.25"
Features:
- 10,000 lb Capacity Per Pair
- Heavy Duty Construction
- These ramps come Unpainted
- Manufactured with a heavy duty flat plate to ensure easy initial loading process.
- Durable construction at hook attachment to the trailer for safety and security.
The contents are property of the author and shall not be used without written consent
Loading excavator at the mini DT with Ramps
Providing outstanding amazing values through process clarity and improvement
We also need:
To transport the excavator using the mini DT we can use a ramp: 2500 mm x 300 mm x say 150 mm thick with hook at the end and ( 600 m landing with legs for support at the bottom optional) built with 3/8 thk angle bar top and bottom 3" and stairs every 30 cm (8 stairs) estimate) by 3/8"
An aluminum ramp costs about $1,800 from China excluding shipping and taxes.
We should also have gutter ramp of 450 mm using same materials. by 300 mm. (width of track of PC 30
We can have the excavator assist when loading and unloading for safety
1. Chain
2. Turnbuckles
3. 3 to 5 tons straps
4. Come along
The contents are property of the author and shall not be used without written consent
Subscribe to:
Posts (Atom)